Installer Manual Riversoft - Maintenance
8.5.6. Controller replacement
No.
Remove the softener and valve covers, see 8.5.2. Covers removal (softener and valve),
A
page 63.
CAUTION
Do not pull on the cables. Release the connectors (1) from controller by pressing on their
locking clips.
B
At the back of the front cover, unscrew the four screws (4).
C
Remove the protective plate (3) and change the controller (2).
D
Connect the new controller, see 4.6.4.3 Controller connection, page 43.
E
Reverse above procedure steps to rebuild.
68 / 90
Operation
Ref. MKT-IM-045 / A - 13.03.2020