Covers Removal (Softener And Valve) - Pentair Riversoft Installer Manual

8.5.2. Covers removal (softener and valve)

No.
CAUTION
Do not pull on the cables. Release the connectors from controller (2) by pressing on their
locking clips.
A Remove the softener cover (1).
B Turn the locking clip (3) on the left to unlock the controller (2).
C Remove the front cover (2) from the valve body (4).
CAUTION
Be careful with cables connections when disassembling the controller (2).
D Reverse above procedure steps to rebuild. See 4.6.4.3 Controller connection, page 43.
Ref. MKT-IM-045 / A - 13.03.2020


Installer Manual Riversoft - Maintenance
Operation
63 / 90