Electrical Connection - Pentair Riversoft Installer Manual

Installer Manual Riversoft - Installation

4.6.4. Electrical connection

4.6.4.1 Softener connection
NOTE

Use the fairlead (1)to block the power supply cable and prevent accidental disconnection.
Bypass configuration
4.6.4.2 Meter connection
NOTE

During shipping, the cable from the back of the controller to the meter assembly may have
been disconnected. If it has, insert the end of the cable into the top of the meter assembly
(1).
42 / 90
Power supply
Manifold configuration
Power supply
Ref. MKT-IM-045 / A - 13.03.2020