Hazards; Personnel; Transport; Material - Pentair Riversoft Installer Manual

NOTE

Ensure that the serial label and the safety tags on the device are completely legible and
clean. If necessary, replace them with new tags and put them in the same places.
2.3.

Hazards

All the safety and protection instructions contained in this document must be observed in order to
avoid temporary or permanent injury, damage to property or environmental pollution.
At the same time, any other legal regulations, accident prevention and environmental protection
measures, as well as any recognized technical regulations relating to appropriate and risk-free
methods of working which apply in the country and place of use of the device must be adhered to.
Any non-observation of the safety and protection rules, as well as any existing legal and technical
regulations, will result in a risk of temporary or permanent injury, damage to property or
environmental pollution.

2.3.1. Personnel

CAUTION
Only qualified and professional personnel, based on their training, experience and
instruction as well as their knowledge of the regulations, the safety rules and operations
performed, are authorized to carry out necessary work.

2.3.2. Transport

The following points must be observed to ensure proper operation of the system:
• do not lay down or flip over the softener at any time. The media may paste to the upper
distributor thus obstructing its slots or enter the valve and may therefore compromise the
softener operation;
• pay attention not to hit the softener;
• use all the safety lifting systems to move the softener;
• do not lift the softener by the valve or bypass.

2.3.3. Material

The following points must be observed to ensure proper operation of the system and the safety of
user:
• beware of high voltages present on the transformer (230 V);
• do not put your fingers in the system (risk of injuries with moving parts and shock due to electric
voltage).
Ref. MKT-IM-045 / A - 13.03.2020

Installer Manual Riversoft - Safety
9 / 90