Agilent Technologies Helium G8610 Series Field Installation Instructions page 29
Ion source replacement for leak detection
Hide thumbs
Also See for Helium G8610 Series:
- Quick reference card (2 pages) ,
- Field replacement instructions (18 pages)
Table of Contents
Advertisement
Vacuum Products Division
22. Insert new filaments into a pair of couplers. Verify filament alignment as shown in Figure 3-10 and
Figure 3-11. Keep screws loose while aligning the filament position, then tighten screws securely
once aligned.
Figure 3-10. Filament positioning
Figure 3-11. Filament alignment
Page 24
Manual 699910005, Hot Ion Source Replacement
Advertisement
Table of Contents
