Agilent Technologies Helium G8610 Series Field Installation Instructions page 18
Ion source replacement for leak detection
Hide thumbs
Also See for Helium G8610 Series:
- Quick reference card (2 pages) ,
- Field replacement instructions (18 pages)
Table of Contents
Advertisement
Vacuum Products Division
20. Insert new filaments into a pair of couplers. Verify filament alignment as shown in Figure
2-8 and Figure 2-9. Keep screws loose while aligning the filament position, then tighten
screws securely once aligned.
Figure 2-8. Filament positioning
Figure 2-9. Filament alignment
Page 13
Manual 699910005, Hot Ion Source Replacement
Advertisement
Table of Contents
