Upgrade Via Usb Key - Automatic Mode; Upgrade Via Web - Automatic Mode - Avaya CU360 Release Notes

© 2021 Avaya Inc. All rights reserved
Figure 19: Software Upgrade Application
•
•
•
•
Figure 20: End Upgrade Message
Upgrade via USB key – Automatic Mode
•
•
•
•
•
•
Upgrade via Web – Automatic Mode
•
•
•
•
Release Notes for Avaya Collaboration Unit CU360
Do not turnoff or unplug the codec unit, until it completes the upgrade.
The application will signal that the software package transfer is completed. Wait until the
codec unit applies the updates contained in the package and the CU360 Video-
collaboration Application restarts, by checking the progress on the CU360 App graphical
interface (monitor screen).
This procedure is completed when you see the initial graphical menu of the CU360 App
displayed continuously for at least one minute after the app is restarted.
If the app does not restart but it shows an indication to repeat the upgrade, press the
"Start" button again.
Save the CU-360_Vx_y_z.exe file containing the software package in an USB key or
storage
Plug the key in the back of the codec unit when it is not in a call.
To upgrade from an USB key, the version file must be named CU-360_Vx_y_z.exe. Do
not change version file name, otherwise the package will not be recognized.
Do not turnoff or unplug the codec unit, until it completes the upgrade.
The application will signal that the software package transfer is completed. Wait until the
codec unit applies the updates contained in the package and the CU360 App restarts, by
checking the progress on the CU360 App graphical interface (monitor screen). Please
note that the code unit will not reboot.
This procedure is completed when you see the initial graphical menu of the CU360 App
displayed continuously for at least one minute after the app is restarted.
Save the CU-360_Vx_y_z.exe file containing the software package in your computer or
mobile storage
Open a Browser on your computer or mobile device
To login into the Codec Unit with a web browser, browse to https://<Codec_IP_Address>
The default credentials are User: Admin, Password: 1234
Software Upgrade 34