Avaya CU360 Release Notes page 128

© 2021 Avaya Inc. All rights reserved
Category
SNMP
Presence
MSSv1
Cloud connection
Avaya
Meetings/Equino
x/Scopia
Management
Floating Bar
Release Notes for Avaya Collaboration Unit CU360
Case Number/
Description of issue
Ticket ID
When playing from local USB, it
Playing is not possible to activate screen
link.
SNMP is not supported
Manual Presence Status is
forced to "Busy" when in a SIP
RVXT5000-1244
call when using IP Office as
Presence and SIP Server.
Offline presence status in not
correctly displayed by the Avaya
Aura endpoint when using Aura
Presence Server 7.1 (pre-
release)
It is not possible to subscribe to
Avaya One-X
accounts used by One-X Portal
Portal for IP Office.
clients.
Contacts are not notified of
subscription requests. It is not
possible to grant/revoke
Avaya One-X
subscription request.
Portal for IP Office.
Endpoints must manually
subscribe to other contacts to
view their presence
MSS is not supported in this
MSSv1
release
Codec Unit Auto-Provisioning
Service may be interrupted,
including for maintenance,
repairs, upgrades, or equipment
or network failures. We may
Cloud Service
discontinue certain features and
Availability
the support for certain Codec
Unit devices at any time. Events
beyond our control may affect
our service, such as force
majeure events.
When Codec Unit outside
company premises is managed
by Equinox Management, it
Cloud Service cannot join an existing meeting
Availability which requires Path Finder
access (H323 call).
If Equinox Management Mode is
set to Local, the endpoint will
not receive roster or calendar
RVSM-10934 notifications, and could not be
RVSM-6308 able to present, record to
network or do other actions
even after inserting a valid PIN,
when connected to Equinox
Management 9.0 or higher.
Equinox Management or Scopia
Management earlier than
9.1.0.365 cannot recognize the
Backward endpoint.
Compatibility Equinox Management 9.2.1 or
earlier can show XT Series image
in place of the proper image in
the endpoint info page.
The CU360 app Floating Bar
doesn't appear on the left of the
split screen with a certain
AXT3100-339 sequence:
• On the Application main
window, press and hold the
Recent button of the Android
Solution/Workaround
Select "Aura 7.1" as presence server type.
As a workaround you can temporarily assign the
same account to another Codec Unit, subscribe to it
from your Codec Unit, and then move it again to the
client.
Temporarily disable Equinox Management or place
a SIP call to join the meeting.
To temporarily disable Equinox Management,
change Configure> Advanced>Remote
Access>Equinox Management>Mode to Local; and
Automatic IP address to No; write down the original
local IP address to be restored later, if any, and set
0.0.0.0 as IP address.
On endpoint, set Configure>Advanced
>Utilities>Remote Access>Equinox
Management>Mode to Cloud.
Assure that Equinox Management 9.x manages
endpoints in cloud mode (Auto-provisioning
enabled).
Upgrade Equinox management to the latest release.
Click anywhere on the CU360 App side of the
screen.
Known Issues 128