Avaya Cu360 Camera Automatic Tracking; Configuring The Avaya Cu360 Camera To Automatically Focus On Active Speakers In Conferences - Avaya CU360 Installing And Administering

Collaboration unit
Hide thumbs Also See for CU360:
Table of Contents

Advertisement

Avaya CU360 camera automatic tracking

Avaya CU360 uses the camera auto-tracking feature to direct meetings intelligently and focus on
active speakers in the conference room.
Avaya CU360 can identify active speakers among a maximum of four people seated in front of the
camera with a field view of 120° in huddle rooms. Avaya CU360 can automatically, pan, tilt, and
zoom the camera for best framing of active speakers.
Configuring the Avaya CU360 camera to automatically
focus on active speakers in conferences
About this task
When Avaya CU360 does not detect audio or a participant in the camera for 20 seconds, the
camera automatically adjusts to the default 1.5x zoom position. If Avaya CU360 detects a
participant in the same position several times, the timeout increases to 2 minutes.
When the automatic tracking mode of the camera is active, you cannot manually pan, tilt, and
zoom the camera or use the camera preset settings.
By default, the automatic tracking mode of the Avaya CU360 camera is disabled.
Tip:
• You can press the Enable/Disable Tracking Camera key on the remote control to activate
or deactivate the auto-tracking functionality of the camera on Avaya CU360.
• You can also enable or disable the camera auto-tracking mode from the Control Camera
panel on the Avaya CU360 endpoint or the More actions options on the Avaya CU360
web interface.
Before you begin
• Manually adjust the camera tilt angle to focus on the face of the participants.
• Ensure that the Avaya CU360 microphone is unmuted.
• Ensure that the privacy mode of the Avaya CU360 camera is disabled.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
On the endpoint menu, Avaya CU360 displays the Configure window.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
July 2020
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Avaya CU360 camera automatic tracking
89

Advertisement

Table of Contents
loading

Table of Contents