Avaya CU360 Release Notes page 80

Collaboration unit
Hide thumbs Also See for CU360:
Table of Contents

Advertisement

© 2021 Avaya Inc. All rights reserved
Figure 96:
Equinox Client for Windows: Chose an Endpoint manually
If not in a call, the shared content will be immediately displayed on the
Presentation Mode is set to Automatic, otherwise press 'Present' button).
When in a call, the shared content will be immediately displayed on the unit and shared with
remote peers as presentation stream (if Remote Presentation Mode is set to Automatic, see codec
unit Configuration below. Otherwise a manual start (present button or key press) is needed to start
sharing).
Once the client is successfully paired to a selected endpoint, its icon on the tray bar might change
while the CU360 will show below icon (white) on the title bar.
To stop Screen Link from the client, use the Client menu accessible by right clicking on the app
icon in the tray bar.
Figure 97:
Icons on Codec Unit when Screen Link is active
Release Notes for Avaya Collaboration Unit CU360
in stand-by mode, you need to wake up the endpoint using its remote-control, to be able
to see its IP address.
A PIN is required by default for manual pairing.
o
Important
Connectivity Requirements: A Screen Link client must be able to connect to the
endpoint IP address for manual pairing, and the endpoint must be able to connect to the
Screen Link client as a streaming server once paired.
Please assure that the PC/Mac's firewall is not blocking the connection from the endpoint
to the computer (RTSP, port 554).
Important
When another client has an active Screen Link connection with the same unit, the pairing
will fail (the endpoint is listed with forbidden icon or manual pairing will fail with "Endpoint
unavailable" message).
To activate Screen link from a different client, terminate presentation on the unit by
pressing Present or stop screen link from the client.
You can also unpair the screen link client from the unit, manually or automatically. See
"Unpair Screen Link" section.
While a screen link is shared to a remote party, splitting the screen on the unit to share an
app will have no effect. You need to stop presentation before splitting the screen.
The whole computer desktop is shared, with resolutions up to 1080p. Higher resolutions,
like 1920x1200 or 4K, are not supported and are automatically down scaled to 1080p.
Audio from the computer is not shared using Screen Link.
CU360 App
(if Local
The CU360 Video-collaboration Application 80

Advertisement

Table of Contents
loading

Table of Contents