Page 1
Avaya CU360 Collaboration Unit Quick Start Guide...
Page 2
WHAT’S IN THE BOX WHAT’S IN THE BOX Avaya CU360 Collaboration Unit One HDMI Cable 2 AAA batteries One Rubber Cap Wall mount One Power Adapter 4 screws 4 *40mm 220V and 110V with 4 plug 6*40mm regional converters One Remote Control...
Page 3
USB C USB A Power Supply When the CU360 is connected to the TV and your Network, the IP address (X.X.X.X) will be displayed in the top left corner of the screen. Using a device connected to the same network, type http://[IP ADDRESS] into the web browser.
Page 4
CONTROLLING THE CU360: CONTROLLING THE CU360: USING THE REMOTE CONTROL USING THE REMOTE CONTROL Power Button Decline Call / BACK Mouse Disconnect & CAPS ENTER Back PG UP Call / Accept SHIFT Call < > HOME PG DWN “ SPACE...
Your remote control is a wireless control device, If the pairing fails, disconnect all the cables pre-paired with your CU360 unit. If you are using from the CU, including USB and repeat the procedure. a new optional remote control, or your remote control is not paired, please follow the below procedure.
Page 6
Language and Desired Protocol. Hold down for two seconds on the Avaya Configure Network Settings. B109. This makes the B109 visible to CU360. Configure Gatekeeper (if H.323 is enabled). icon is displayed on your B109 and Configure SIP Server (if SIP is enabled).