© 2021 Avaya Inc. All rights reserved
Connect to Wi-Fi Display (Miracast) from Windows 10 PC
To connect a Windows PC supporting Wi-Fi Display to your CU360, do the following
-
-
-
-
-
-
Release Notes for Avaya Collaboration Unit CU360
•
It is suggested to connect the PC or mobile/tablet before placing a call, or use an
Ethernet cable to connect your CU360 Device to the network
Launch the CU360 Wi-Fi Display app as explained in the "CU360 as Wi-Fi Display"
section.
On your Windows PC, click on the Notification Icon present on the Tray Bar, and select
"Connect"
Check if Miracast is supported
If it is supported, click on your CU360 Name (as a Display)
Once connected, the Windows PC will see your CU360 device as and additional monitor
(second, third...) at 1080p@30fps, where to extend or duplicate the PC desktop.
Using the "Project" tab on the PC, you can change PC the desktop projection mode:
Duplicate, Extend, ...
o
The CU360 Video-collaboration Application 85