Nortel Communication Server 1000S Installation And Configuration Manual page 83

18 Press DIALPLN until NATIONAL displays.
19 Press EXIT.
20 Press NO to execute SPM.
21 Press YES to enter datafill.
22 Press YES to delete existing datafill.
23 Press KEY# then use to keypad to enter the key number you want to
program.
24 Press EDIT DN then use the keypad to enter the digits of the DN.
25 Press OK then SAVE after each DN.
26 Repeat step 18 to step 25 for each voice DN keypad you want.
27 Press INSTALL and begin at step 4, If you entered incorrect data. If the
entries were correct, press EXIT.
28 Make a voice call to make sure the telephone is operational.
Table 19
M5317TDX terminal error codes (Part 1 of 2)
Error Code
Number Description
>>10<< S/T-loop sync loss and/or Frame sync loss.
>>11<< L1 transmit timer expired.
>>21<< Voice TEI removed by network.
>>22<< Circuit data TEI removed by network.
>>23<< Voice and circuit data TEI removed.
>>24<< X25 TEI removed.
>>25<< Voice and X25 TEI removed.
>>26<< Circuit data and X25 TEI removed.
>>27<< All TEI removed.
ISDN Basic Rate Interface
Configuring ISDN BRI hardware
.
End of Procedure
Page 83 of 120
Installation and Configuration