Nortel Communication Server 1000S Installation And Configuration Manual page 27

Procedure 7
Connecting ISDN BRI terminals to the system
To connect the ISDN BRI terminals to the system, perform the following
steps.
• Connect the system to the MDF.
• Cross-connect the MDF.
• Connect the ISDN BRI terminals to the Digital Subscriber Line (DSL).
Figure 5 on page 28 shows a typical DSL with ISDN BRI terminals
connected to it using modular cables.
ISDN Basic Rate Interface
Installing ISDN BRI hardware
Installation and Configuration
Page 27 of 120