Page 18 of 120
Installing ISDN BRI hardware
553-3001-218
Standard 2.00
3
Install the Multi-Purpose ISDN Signaling Processors (MISPs).
4
Install the S/T Interface Linecards (SILCs) and/or U Interface Linecards
(UILCs) or Basic Rate Signaling Concentrators (BRSCs).
5
Connect ISDN BRI terminals. This procedure comprises the following:
— Connect the system to the Main Distribution Frame (MDF).
— Cross-connect the MDF.
— Connect ISDN BRI terminals to the DSL.
— Initialize the ISDN BRI terminals.
Procedure 1
Selecting the card slots
To install ISDN BRI cards, perform the following steps:
1
Identify all the slots that can contain the ISDN BRI cards. First identify the
modules with unused network and peripheral card slots and then remove
the covers from the identified modules. To identify the modules, use the
following Print Programs.
•
LD 22 to print the system configuration and identify unused network
card slots to install MISPs
•
LD 20 to list unused IPE card slots to install SILCs, UILCs and
BRSCs
September 2004