Overview
Checking the Software Version
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Some procedures are used more often than others. The
intention with this section is to keep the most used procedures in
one place.
To check the version of software on the Invenia ABUS 2.0:
1. Log into the Invenia 2.0 2.0 software.
2. Click the configuration icon (lower, right corner of the Image
tab) to open the System Configuration page.
3. Click About in the left column.
Figure 4-1. Invenia ABUS 2.0 Software Version
General procedures
4-3