Switch ON the AC Power to Invenia ABUS 2.0
WARNING
Power shut down
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
The Power button is used to turn the system On and Off. The
Power button is located on the right front cover.
1. Switch ON the Power Mains Switch at the rear of the unit.
2. Press once on the On/Off button on the Invenia ABUS 2.0
to boot the unit.
DO NOT unplug the power cord until after the complete
shutdown procedure has been performed.
When you switch off the unit, the system performs an automatic
shutdown sequence. Press the On/Off/Standby button to initiate
the shutdown sequence.
Preparing for Setup
3-45