Preparing For Setup; Verify Customer Order; Physical Inspection; Emi Protection - GE Invenia ABUS 2.0 Technical Publication

System Setup

Verify customer order

Physical inspection

EMI protection

3-34

Preparing for Setup

Compare items received by the customer to that which is listed
on the delivery order. Report any items that are missing, back
ordered, or damaged.
Verify that the device arrived intact (visual inspection).
If the device has been damaged, please refer to 'Damage in
transportation' on page i-15 in the beginning of this manual.
The Invenia ABUS 2.0 has been designed to minimize the
effects of Electro-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the
device from image artifacts caused by this interference. For this
reason, it is imperative that all covers and hardware are installed
and secured before the unit is put into operation.
See 'EMI limitations' on page 2-5 for more information about
EMI protection.
The Invenia ABUS 2.0 has been designed to minimize the
effects of Electro-Magnetic Interference (EMI). Many of the
covers, shields, and screws are provided primarily to protect the
device from image artifacts caused by this interference. For this
reason, it is imperative that all covers and hardware are installed
and secured before the unit is put into operation.
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4