Electrostatic Discharge (Esd) Prevention - GE Invenia ABUS 2.0 Technical Publication

Electrostatic discharge (ESD) prevention

WARNING
WARNING
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
DO NOT touch any boards with integrated circuits prior to
taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Invenia ABUS
2.0 (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.
Risk of electrical shock, Invenia ABUS 2.0 must be turned off.
Avoid all contact with electrical contacts, conductors and
components. Always use non-conductive handles designed for
the removal and replacement of ESD sensitive parts. All parts
that have the potential for storing energy must be discharged or
isolated before making contact.
Electromagnetic compatibility (EMC)
1-23