Dangerous Procedure Warnings - GE Invenia ABUS 2.0 Technical Publication

Introduction

Dangerous procedure warnings

DANGER
Explosion
Hazard
WARNING
1-16
Warnings, such as the example below, precede potentially
dangerous procedures throughout this manual. Instructions
contained in the warnings must be followed.
DANGEROUS VOLTAGE WARNING
DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH,
ARE PRESENT IN THIS EQUIPMENT. USE EXTREME
CAUTION WHEN HANDLING, TESTING AND ADJUSTING.
Heat warning
If the covers are removed from an operating Invenia ABUS 2.0,
some metal surfaces may be warm enough to pose a potential
heat hazard if touched, even while in shutdown mode.
Explosion Warning
DO NOT operate the equipment in an explosive atmosphere.
Operation of any electrical equipment in such an environment
constitutes a definite safety hazard.
Equipment Modification Warning
DO NOT substitute parts or modify equipment
Because of the danger of introducing additional hazards, ONLY
install GE approved parts. DO NOT perform any unauthorized
modification of the equipment.
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4