System Setup
Scanning Protocols
3-64
The Scanning Protocol menu allows you to select from one of
the four (4) preset workflow protocols:
•
Perform Exam Starting on the patient's right
•
Perform Exam Starting on the patient's left
•
Perform complete exam from only the patient's right side
(right side of the bed only)
•
Perform complete exam from only the patient's left side (left
side of the bed only)
•
Specify location of the transducer's start position.
Figure 3-25. Scanning Protocol Configuration Menu
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4