Replacement Procedures
System Backup and Software Load
Notice against user modification
WARNING
8-14
System Backup and Software reloading needs to be performed
by trained, qualified personnel. Contact GE for training.
Never modify this product, including system components,
software, cables, and so on. User modification may cause safety
hazards and degradation in system performance. All
modification must be done by a GE qualified person.
This equipment contains dangerous voltages that are capable
of serious injury or death.
If any defects are observed or malfunctions occur, stop
operating the equipment and perform the proper action for the
patient. Inform a qualified service person and contact a Service
Representative for information.
There are no user serviceable components inside the console.
Refer all servicing to qualified service personnel only.
Ensure that unauthorized personnel do not tamper with the
unit.
Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4