Putting A Call On Hold; Putting A Call On Hold While You Make A Second Call - Avaya 4621SW User Manual

Chapter 3: Using Your Quick Edition IP Telephone
2. To hang up, perform one of the following actions:
Return the handset to its cradle.
●
If you are using the speakerphone, press the Speaker (
●
If you are using a headset, press the Headset (
●
To ignore an incoming call
Select the Ignore softkey while the Telephone is ringing.
●
The Telephone immediately stops ringing. If call-forwarding rules have been defined (see
Setting up Call Forwarding on page
rules. If Voicemail is enabled (see
handled by the Voicemail Application.

Putting a Call on Hold

You can put a call on hold to temporarily remove yourself from the call. While the active call is
on hold, you can make outgoing calls or select incoming calls.
To put a single active call on hold
1. If you are handling one active call, press the Hold (
The display area shows the HELD status of the call. You can replace the handset without
losing the call.
2. To take the call off hold, perform one of the following actions:
Pick up the handset and press the Hold (
●
If you are using the speakerphone, press the Line/Feature ( ) button that corresponds
●
to the held line.
If you are using a headset, press the Hold (
●
There may be a slight delay before the call becomes active again.

Putting a Call on Hold while You Make a Second Call

The Quick Edition IP Telephone can accommodate situations where you are engaged in an
active call but want to place a call to another party.
38
Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide
) button.
72), the call is handled according to call-forwarding
Using the Voicemail Application on page
) button.
) button.
) button.
) button.
57), the call is
July 2006