Dropping Or Disconnecting The Last Participant From A Conference Call; Putting A Conference Call On Hold And Resuming A Call - Avaya J189 Using Manual

Ensure that your administrator has configured the Details softkey.
3. Select the person you want to drop.
4. Press Drop button or Drop soft key.
Dropping or Disconnecting the last participant from a conference
call
About this task
Depending on the configuration made by your administrator, you can disconnect the last
participant who joined the conference call. After you disconnect the last participant, you cannot
disconnect other participants. You can disconnect a participant again after you add another
participant to the conference call.
Before you begin
Ensure that the administrator enabled the feature.
Procedure
1. From the phone screen, select your active conference call.
You will see the More soft key.
2. Press More > Drop when the conference is active.
Result
The participant who was added last gets disconnected from the conference.

Putting a conference call on hold and resuming a call

About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.
April 2022 Using Avaya J189 IP Phone H.323
Comments on this document? infodev@avaya.com
Conferences
37