Making Calls Using The Call Log - Avaya 4621SW User Manual

Chapter 8: Using the Call Log Application
Note:
If you have a 4621 SW IP Telephone, the Line/Function ( ) button on the bottom
Note:
right side of the display area provides access to the Call Log Application. You can
select the Log softkey instead of performing Steps 1 and 2 of the procedures in
this section.
To view Call Log entries
1. Press the Options (
2. Select Call Log on the Main menu, or press 2 on the dialpad.
The Incoming list is displayed.
3. If you want to view the list of dialed numbers, select the Out softkey.
Tip:
If your Quick Edition IP Telephone is connected to the same network as your
Tip:
computer, you can use the web browser on the computer to view Call Log entries.
For more information about the web-based options, see
Log Page on page

Making Calls using the Call Log

You can dial a number quickly from one of the lists in the Call Log. You must subscribe to a
"Caller ID" service for the names and/or numbers of incoming external calls to be recorded in
the Incoming list. If the number of the caller is unknown or private, you cannot return the call. In
addition, the number may require a prefix (9 to reach the PSTN; 8 to reach a SIP network) and
area code for you to successfully dial an outside line.
Making a call from the list of incoming or outgoing calls
1. Press the Options (
2. Select Call Log on the Main menu, or press 2 on the dialpad.
The Incoming list is displayed.
3. If you want to dial a previously dialed number, select the Out softkey.
4. Select the Line/Function ( ) button beside the number that you want to dial.
The information associated with the entry is displayed.
5. To place the call, either pick up the handset or press the Speaker (
64
Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide
) button.
102.
) button.
Options on the Caller's
) button.
July 2006