Hardware Installations And Upgrades; Before You Begin; Tools And Supplies Needed; System Reference - Intel R1000EP Series Service Manual

Hide thumbs Also See for R1000EP Series:

Table of Contents

Server System Features

2 Hardware Installations and Upgrades

Before working with your server product, pay close attention to the "Safety Information" at the

beginning of this manual.

Note: Whenever you service the system, you must first power down the server and unplug all peripheral

devices and the power cord.



Phillips* (cross head) screwdriver (#2 bit)



Needle nosed pliers



Anti-static wrist strap and conductive foam pad (recommended)

All references to left, right, front, top, and bottom assume the reader is facing the front of the

chassis as it would be positioned for normal operation.

Note: The Intel

Server System R1208EP2SHFN and R1304EP2SHFN

are shown for illustration purposes. Server components with the product family are identical.

When you add or remove components from your server system, make sure your cables are routed

correctly before reinstalling the server system cover. Use caution to make sure no cables or wires

are pinched and that the airflow from the fans is not blocked. Use the figures below to determine

the correct cable routing.

Note: Red lines are for power connection, dot lines are for optional device connection.

Intel

Server System R1000EP Service Guide

Table of Contents