Replacing A System Fan; Figure 70. Replacing The Backup Battery; Figure 71. Replacing A System Fan - Intel R1000EP Series Service Manual

Server System Features
4. Dispose of the battery according to local ordinance.
5. Remove the new lithium battery from its package, and, being careful to observe the correct
polarity, insert it in the battery socket.
Note: You will need to run the BIOS Setup to restore the configuration settings to the BIOS variables.

Replacing a System Fan

1. Disconnect the fan cable (see letter A).
2. Pull system fan straight up to remove it from the fan holder.
3. Replace the system fan.
44

Figure 70. Replacing the Backup Battery

Figure 71. Replacing a system fan

®
Intel Server System R1000EP Service Guide