Removing a PCI Add-in Card
1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly".
2. Remove the screw as shown (see letter A).
3. Remove the PCI add-in card from the riser card connector (see letter B).
Note: Make sure that all empty add-in card slots have filler panels installed.
Replacing a PCI Riser Card
Caution: PCI riser cards are NOT hot-swappable. Before removing or replacing the riser card,
you must first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
®
Intel
Server System R1000EP Service Guide
Figure 44. Installing a PCI Add-In Card
Figure 45. Removing a PCI Add-In Card
Server System Features
29