Table of Contents
Advertisement
2. Open the Load Plate. Push the rear tab with your finger tip to bring the front end of the load
plate up slightly (see letter A). Open the load plate all the way (see letter B).
3. Install the Processor. Take the processor out of the box and remove the protective shipping
cover (see letter "A"). Orient the processor with the socket so that the orientation notches on
the processor align with the two orientation posts on the socket (see letter "B").
Note: The underside of the processor has components that may damage the socket pins if installed
improperly. Processor must align correctly with the socket opening before installation. DO NOT
DROP processor into socket!
®
Intel
Server System R1000EP Service Guide
Figure 27. Installing Processor – Open the Socket Lever
Figure 28. Installing Processor – Open the Load Plate
Figure 29. Installing Processor – Install the Processor
Server System Features
21
Advertisement
Table of Contents
