Field Installation - Siemens UL 1066 Operating Instructions Manual

18.1.1 Field installation

Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this device before working on this device.
Damage to accessory.
Over-tightening the mounting screws may strip the plastic frame, or damage components, rendering the accessory unusable.
Hardware shall be tightened carefully until the underside of the screw head is flush with the mounting surface.
Pre-assembly
T 30
3 Nm
28 lb-in
(1)
(2)
(1) 6 (8 for FS III)
(2) 4 (8 for FS III) washers
18 – 2
DANGER
1
2
6x
NOTICE