Siemens UL 1066 Operating Instructions Manual page 99

Field installation
The trip units ETU745 and ETU748 can be field installed with an alphanumeric display.
Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this device before working on this device.
- OPEN circuit breaker and discharge the closing spring
- Disconnect external 24 V DC voltage supply, if applicable
- Remove sealing cap of trip unit, if applicable
Removing dummy flange
4
Installing display and latching it tight
- Fit and seal trip unit sealing cap, if applicable
- Reconnect external 24 V DC voltage supply, if applicable
DANGER
 (page 9-53)
3
1
2
1
 (page 9-53)
 (page 23-2)
5
2
3
9 – 19