Removing The Circuit Breaker From The Cradle - Siemens UL 1066 Operating Instructions Manual

23.1.2 Removing the circuit breaker from the cradle

Crank the circuit breaker into the disconnected position
- Unlock racking handle / withdraw racking handle
red
Position indicator
Push in the racking handle
Racking Handle Damage.
Turning the racking handle beyond the stop will cause damage to the racking mechanism.
When the stop is reached, rotate the handle counter-clockwise until it can be stowed.
Pull circuit breaker into withdrawn position and remove
 (page 6-3)
1
1
Stop
blue
NOTICE
2
3
green
2
3
4
23 – 3