Unlocking The Racking Handle / Withdrawing The Racking Handle; Racking Circuit Breaker Into Connected Position; Inserting Racking Handle - Siemens UL 1066 Operating Instructions Manual

6.1.3

Unlocking the racking handle / withdrawing the racking handle

1
2
3
1 OPEN circuit breaker
2 Push the crank inwards
3 Pull out the handle
4 Lift and hold the control lever
5 Pull out the crank
6.1.4

Racking circuit breaker into connected position

Position indicator
green
6.1.5

Inserting racking handle

1
Racking Handle Damage.
Turning the racking handle beyond the stop will cause damage to the racking mechanism.
When the stop is reached, rotate the racking handle counter-clockwise until it can be pushed inwards.
6 – 3
4
Hold
5
Stop
blue
3
NOTICE
red
2
4