Commissioning; Preparation Of Draw-Out Circuit Breaker; Inserting The Circuit Breaker Into The Cradle - Siemens UL 1066 Operating Instructions Manual

6

Commissioning

6.1

Preparation of draw-out circuit breaker

6.1.1

Inserting the circuit breaker into the cradle

NOTE
Remove padlocks from the shutter and place the locking device in the stowed position
Check circuit breaker position indicator/
Draw out guide rails
1
green
1) The circuit breaker can only be pushed in when the indicator displays "DISCON".
2) Pull out guide rails to the end-stop.
Place the circuit breaker into the guide rails and push it into the cradle up to the disconnected position. Close cubicle door.
3
4
6 – 1
4
4
 (page
15-19).
2
5