Siemens UL 1066 Operating Instructions Manual page 100

Modifying the angle of the display
At the factory, the alphanumeric display is installed with a downward inclination. However, it can be turned in a vertical direction by 180°, the
display is then inclined upwards.
Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this device before working on this device.
- OPEN the circuit breaker and discharge the closing spring
- Disconnect external 24 V DC voltage supply, if applicable
- Remove trip unit sealing cap, if applicable
Removing the display
4
9 – 20
DANGER
 (page 9-53)
3
1
2
 (page 23-2)
5