Installing The Ready-To-Close Switch S20 - Siemens UL 1066 Operating Instructions Manual

12.2

Installing the ready-to-close switch S20

Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this device before working on this device.
High speed moving parts.
Can cause serious personal injury.
Discharge the closing spring before inspection and before carrying out any work on the circuit breaker.
Snap-in mounting
The connecting wires from the ready-to-close signaling switch must be connected to terminal X6 according to the wiring
Ready-to-close signaling switch S20
12 – 3
DANGER
WARNING
Signaling switches
S20
Catalog No.
WLRTCS
plan (page 8-3).