Rpn Compensation Flowchart - Sony Power HAD FX HSC300R Service Manual

Procedure
1. Open the RPN MANAGE [S04] page of the SERVICE menu.
<RPN MANAGE>
RPN ALL PRESET
AUTO CONCEAL
APR AT ABB
2. Only perform the APR of RPNs.
ITEM: AUTO CONCEAL → EXEC
Tip
RPNs of three channels are automatically detected at the same time through this operation.
Note
If AUTO CONCEAL is executed with a wrong switch setting, delete all the recorded data. Make these settings and
execute AUTO CONCEAL carefully so that the RPN compensated data is not deleted completely.
ITEM: RPN ALL PRESET → EXEC
3-6-5.

RPN Compensation Flowchart

If any RPN still remains after the manual RPN compensation adjustment, handle the RPN according to the following
flowchart.
There is an RPN that was not compensated by
the manual RPN compensation adjustment.
Automatic black balance adjustment (ABB)
(Set the AUTO W/B BAL switch to the BLK side.)
Perform the ABB three times in a row.
RPN was removed?
Perform the manual RPN compensation.
Compensation is successful.
HSC300RF/HSC100RF/HSC300R/HSC100R
S04 TOP
: EXEC
: EXEC
: ON
YES
NO Compensation is successful.
3-32