Pld; Corresponding Pld; Upgrading Pld Data - Sony Power HAD FX HSC300R Service Manual

1-10.

PLD

This unit uses the PLD (Programmable Logic Device) that supports USB drive to write and rewrite the internal data.
If the part listed below needs to be replaced or to be upgraded, contact your local Sony Sales Office/Service Center.
Note
The part number of PLD (or ROM for PLD) in which data is not written yet, is shown in
Therefore, if part replacement is required, write the data by the following procedure.
In the case of the PLD type that runs on the program stored in external ROM, data needs not to be written only by
replacing the part if the specific PLD only is defective.
1-10-1.

Corresponding PLD

PLD (Ref. No./Board Name)
IC201/TG-285
*1
IC202/TG-285
IC1001/SY-430
IC1102/SY-430 *2
IC2002/DPR-358
IC702/DPR-358 *3
IC301/SDI-117
*4
IC302/SDI-117
IC701/CD-78
*5
IC1002/CD-78
IC1401/CD-78
IC1403/CD-78 *6
1-10-2.

Upgrading PLD Data

Equipment Required
USB drive (commercially available)
Tip
For recommended USB drive, refer to "Using a USB Drive" in the operation manual.
Preparation
Copy the PLD update data to the USB drive using the following procedure.
Note
For how to obtain the version update data file (hsc300r_tg.pkg, hsc300r_sy.pkg, hsc300r_dpr.pkg, hsc300r_sdi.pkg,
hsc300r_cd1.pkg, hsc300r_cd2.pkg), contact your local Sony Sales Office/Service Center.
1. Create the following directory in the USB drive.
\MSSONY\PRO\CAMERA\HSC300R
2. Copy the PLD version update data file to be updated to the directory created.
*1: IC202/TG-285 is the ROM for IC201/TG-285.
*2: IC1102/SY-430 is the ROM for IC1001/SY-430.
*3: IC702/DPR-358 is the ROM for IC2002/DPR-358.
*4: IC302/SDI-117 is the ROM for IC301/SDI-117.
*5: IC1002/CD-78 is the ROM for IC701/CD-78.
*6: IC1403/CD-78 is the ROM for IC1401/CD-78.
HSC300RF/HSC100RF/HSC300R/HSC100R
"7. Spare
File Name
hsc300r_tg.pkg
hsc300r_sy.pkg
hsc300r_dpr.pkg
hsc300r_sdi.pkg
hsc300r_cd1.pkg
hsc300r_cd2.pkg
Parts".
1-28