Sony Power HAD FX HSC300R Service Manual page 60

5. Remove the two outside panel supports from the portions A and remove the outside panel assembly.
SDI-117 board
CN203
Harness
Optical fiber cable
[1]
Connector
(CN-3653 board)
Note
• When reconnecting the optical fiber cables, check their numbers [1],[2] and connect them correctly and securely
insert the optical fiber cables to the end of respective connectors.
• After the optical fiber cable is unplugged, cover the tip of the optical fiber cable assembly with a cap or the
like to prevent adhesion of dust and foreign objects.
6. Install the removed parts by reversing the steps of removal.
HSC300RF/HSC100RF/HSC300R/HSC100R
Connector
Optical fiber cable
[2]
Harness
Outside panel Assembly
Portion A
Outside panel support
Outside panel support
Portion A
2-8