Sony Power HAD FX HSC300R Service Manual page 150

Note
Note that, when the number of scene files is changed from 32 to 5, the data of the sixth and the following scene files
are lost.
AF DISPLAY
When an auto focus lens is used, a focal area marker and a focusing indicator can be displayed on the viewfinder. For
details, refer to "When an Autofocus Lens is
FILTER RESUME
When the FILTER LOCAL button is set to ON and OFF in these cameras, the filter position of camera operates as
follows by setting the FILTER RESUME.
ON: Filter position before the FILTER LOCAL button is set to ON.
OFF: Filter position is not changed.
LENS IF MODE
When a lens that is able to communicate with a camera through the serial interface, the interface mode can be changed
forcibly to the parallel interface.
AUTO: Sets an interface automatically.
PARA: Sets a parallel interface forcibly.
CC FILTER
<CC FILTER>
A: 3200K
B: 3200K
C: 4300K
D: 6300K
When the CC filter is replaced with a nonstandard color temperature conversion filter, change this setting. However,
when the CC filter is replaced with a filter without color temperature conversion, such as cross filter, set 3200K. This
setting is a reference for color temperature display and the color temperature control function.
MANUAL RPN
<MANUAL RPN>
RPN CH SELECT
RPN CURSOR
CURSOR H POS.
CURSOR V POS.
CURSOR JUMP
RPN WIDTH
RECORD RPN
DELETE RPN
MONITOR SEL
The MANUAL RPN menu is used for manual RPN compensation. For details, refer to
Compensation AdjustmentPreparation".
HSC300RF/HSC100RF/HSC300R/HSC100R
Used".
S02 TOP
S03 TOP
: R
: OFF
: 1008
: 576
: CURR
: 1
: EXEC
: EXEC
: YPbPr
"3-6-2. Manual RPN
6-4