2-3.
Outside Panel Section (Fiber)
2-3-1.
Outside Panel Assembly (Fiber)
Procedure
1.
Loosen the five screws with stopper and open the outside panel assembly in the direction of the arrow.
Screws with stopper
Outside panel assembly
2.
Disconnect the two optical fiber cables from the connectors on the SDI-117 board.
3.
Disconnect the harness from the connector (CN203) on the SDI-117 board.
4.
Disconnect the harness from the connector on the CN-3653 board.
HSC300RF/HSC100RF/HSC300R/HSC100R
Screws with stopper
2-7