Sony Power HAD FX HSC300R Service Manual page 39

Tip
For recommended USB drive, refer to "Using a USB Drive" in the operation manual.
Preparation
Copy the OS update data to the USB drive using the following procedure.
Note
For how to obtain the version update data file (hsc300r_os.pkg), contact your local Sony Sales Office/Service Center.
1. Copy the OS update data to the USB drive using the following procedure.
/MSSONY/PRO/CAMERA/HSC300R
2. Copy the version update data file "hsc300r_os.pkg" to the directory created.
Procedure
1. Connect the USB drive that contains the version update program to the USB connector of this unit.
2. Turn on the power of the unit.
3. Display the "ROM VERSION" page of the DIAGNOSIS menu.
4. Confirm that the cursor "?" is displayed to the left of page number, and then press the ENTER button long.
Note
The page to which "?" is displayed by the model is different.
• HSC300R/100R: "?" is displayed in the left of D02.
• HSC300RF/100RF: "?" is displayed in the left of D03.
5. Updatable items become selectable. Select "OS" and then press the ENTER button.
6. A message "VERSION UP OK?" appears. Select "YES."
7. The unit restarts automatically and the version update starts.
Upon completion of the version update, a message "UPDATE SUCCEEDED" appears.
8. Turn off and on the power of the unit and confirm that the version has been updated on the "ROM VERSION" page
of the DIAGNOSIS menu.
HSC300RF/HSC100RF/HSC300R/HSC100R
1-27