Replacing The Gasket Ring For The Gearshift Shaft - Skoda Fabia II 2007 Workshop Manual

2 Replacing the gasket ring for the
gearshift shaft
⇒ "2.1 Replacing the gasket ring for the gearshift shaft",
page 193
2.1 Replacing the gasket ring for the gear‐
shift shaft
Special tools and workshop equipment required
♦ Thrust piece - T10174-
– Removing multi-function switch - F125-
⇒ "2.1 Removing and installing the multi-function switch F125
", page 185 .
– Remove gasket ring with screwdriver, do not damage the
gearshift shaft.
– Coat the exterior area with ATF and half fill the space between
the sealing lips with sealing grease - G 052 128 A1- .
• Fitting position: The open side of the gasket ring faces towards
the gearbox.
– Drive in the new gasket ring with pressure plate - T10174- up
to the stop, do not twist the gasket ring.
– Installing and setting multi-function switch - F125-
⇒ "2 Removing, installing and setting multi-function switch
F125 ", page 185 .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014

2. Replacing the gasket ring for the gearshift shaft

193