Skoda Fabia II 2007 Workshop Manual page 75

– Open the warm-type clamp -arrow- below the handle.
– Detach the selector lever handle -1- together with the selector
lever collar from the selector lever towards the top -arrow A-
so that the lock button -2- is not pressed in.
Note
Ignore -arrow B-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
• The lock button -2- points in direction of travel.
Caution
The shift mechanism can be damaged.
♦ The lock button at the selector lever handle must protrude
when installing. If the lock button is inadvertently pressed
in when removing the selector lever handle, it must be re‐
positioned
⇒ "2.8 Installing the lock button at the selector lever han‐
dle", page 72 .
♦ If the selector lever handle with pressed in lock button is
installed, the selector lever handle and the control cable
for the selector mechanism will be destroyed.
– Press the selector lever handle -1- onto the selector lever in
-direction of arrow B- in such a way that the lock button -2- is
not touched.
• The selector lever handle must latch into the round slot of the
selector lever.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
71