Skoda Fabia II 2007 Workshop Manual page 66

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2.5.4 Removing and Installing the cover for
the shift mechanism Rapid
Special tools and workshop equipment required
♦ Release tool - T30098-
Removing
– Carefully press the release tool - T30098- in
-direction of arrow- and subsequently clip the cover out of the
centre console.
– Pull the cover -B- upwards over the handle.
– Disconnect plug -A- for lamp for selector lever scale illumina‐
tion - L101- .
Install
Installation is carried out in the reverse order. When installing,
observe the following:
Note
When plugging in the plug connection for lamp for selector lever
scale illumination - L101- make sure that the contact pins are not
bent.
– Insert the plug connection -A- for lamp for selector lever scale
illumination - L101- .
Note
When fitting on the cover, make sure that the retaining lugs do
not break off.
– Clip cover for shift mechanism into centre console.
2.5.5 Removing and Installing the cover for
the shift mechanism Octavia III
Special tools and workshop equipment required
62
Rep. gr.37 - Controls, housing