Components At Wiring Loom Of 8-Pin Plug - Skoda Fabia II 2007 Workshop Manual

13 - Gearbox input r.p.m. sender - G182-
❑ with cable and 2-pin plug connection
❑ ⇒ "1.9 Removing and installing the gearbox input r.p.m. sender G182 ", page 183
14 - Screw
❑ 7 Nm
15 - Gearbox output r.p.m. sender - G195-
❑ with cable and 2-pin plug connection
❑ ⇒ "1.10 Removing and installing the gearbox output r.p.m. sender G195 ", page 184
16 - Gearbox housing
17 - ATF bleeder
18 - ATF radiator
❑ ⇒ "5.2 Removing and installing ATF radiator", page 159
19 - Multi-function switch - F125-
❑ ⇒ "2.1 Removing and installing the multi-function switch F125 ", page 185
❑ ⇒ "2.2 Setting multi-function switch F125 ", page 187
❑ is checked by self-diagnosis
20 - Sealing ring
❑ replace ⇒ Electronic Catalogue of Original Parts
21 - ATF drain plug
❑ 40 Nm
22 - Lever
❑ for inside selector lever shaft at the slide valve body
❑ ⇒ "1.6 Removing and installing the slide valve body", page 171
23 - Washer
24 - Nut
❑ Pay attention to fitting location of the nut
⇒ "1.6 Removing and installing the slide valve body", page 171
❑ 10 Nm
25 - Large spring
26 - Small spring
27 - Shock absorber piston
28 - Wiring loom with 8-pin plug and integrated gearbox oil temperature sender - G93-
❑ with O-ring at connector
❑ Replace O-ring ⇒ Electronic Catalogue of Original Parts
❑ ⇒ "1.8 Removing and installing wiring loom with 8-pin plug and integrated gearbox oil temperature sender
G93 ", page 181
❑ ⇒ "1.3 Components at wiring loom of 8-pin plug", page 168
29 - Screw
❑ 6 Nm
30 - Wiring loom with 14-pin plug
❑ with O-ring at connector
❑ Replace O-ring ⇒ Electronic Catalogue of Original Parts
❑ ⇒ "1.7 removing and installing wiring loom with 14-pin plug", page 180
31 - Screw
❑ 6 Nm
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
1. Removing and installing oil pan, oil filter, slide valve body and internal wiring looms
Gearbox 09G - Edition 07.2014
167