Skoda Fabia II 2007 Workshop Manual page 177

– Unscrew the 3 screws -D- and -E-.
Carefully disconnect the following plug connections:
Note
Plug connection -1- and plug connection -4- are not available as
of 12.2004.
– Plug connection -1- for hydraulic pressure sender - G193- .
– Plug connection -2- for gearbox input r.p.m. sender - G182- .
– Plug connection -4- for hydraulic pressure sender 2 - G194- .
– Plug connection -6- for gearbox output r.p.m. sender - G195- .
– Carefully pull the gearbox oil temperature sender - G93- -8-
together with the bracket -7- out of the slide valve body.
Note
When re-installing, pay attention to the attachment of the bracket
on the gearbox oil temperature sender - G93- .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
1. Removing and installing oil pan, oil filter, slide valve body and internal wiring looms
Gearbox 09G - Edition 07.2014
173