Skoda Fabia II 2007 Workshop Manual page 102

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Install catch plate -A-.
Note
The catch plate is clipped to the left and to the right with retaining
lugs.
– Screw in screws -arrow-.
– Screw the cover with affixed seal with new nuts to the shift
mechanism. Watch out for the correct arrangement of the seal.
– Tighten nuts for cover -arrows- to tightening torque
⇒ "2.1.1 Summary of components - Gearshift mechanism -
Octavia II up to 10.2009", page 41
– Insert the boot of the selector lever control cable into the cover.
For vehicles Fabia II and Roomster (up to production date
10.2011)
– Press the selector lever control cable -2- onto the selector lev‐
er -3-.
– Fit new locking clasp -1- for selector lever control cable at the
gearshift mechanism.
– Screw cover for shift mechanism -arrows- with new nuts and
tighten to the tightening torque
⇒ "2.1.4 Summary of components - Shift mechanism up to
10.2011 (Fabia II and Roomster)", page 47
Continued for all vehicles
– Shift selector lever into position "P".
98
Rep. gr.37 - Controls, housing
.
.