Main Board Removal - Agilent Technologies ENA Series Service Manual

Replacement Procedure
Replacement Procedure for E5092A-020

Main Board Removal

Tools Required
•
•
Procedure
Refer to Figure 5-7 for this procedure.
Step 1. Remove the outer cover as described in "Outer Cover Removal" on page 178.
Step 2. Detach the front chassis as described in "Front Chassis Detachment" on page 179.
Step 3. Remove the front frame as described in "Front Frame Removal" on page 180.
Step 4. Remove the three TORX T10 screws (item 1) from the assembly.
Step 5. Remove the four hex nut (item 2) from the assembly.
Step 6. Lift the main board from the assembly.
Figure 5-7 Main Board Removal
184
Box wrench 5.5mm
TORX screwdriver, T10, T15 and T20.
Chapter 5