Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 54

8. In the Protocol Selection tab, use the Protocol Selected drop-down menu next to
QUAD_124 to select Custom 1 / 28.00 Gbps
X-Ref Target - Figure 2-17
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-17: Customize IP– Protocol Selection
www.xilinx.com
Chapter 2: Creating the IBERT Cores
(Figure 2-17).
Send Feedback
X15581-121416
54